Intrusion & Access Control Pre-Wiring for Commercial Facilities

Our technicians install low-voltage security wire for badge readers, electronic access control systems, door sensors, and control panels to EIA/TIA standards, delivering organized terminations, ANSI/TIA-606 labeling, and Fluke-certified testing.

Commercial Cabling Company is headquartered in Arizona with a wide network of trusted technicians throughout the United States.

Access Control Security Wire and Cable Installation

Commercial Cabling Company provides low-voltage infrastructure for commercial access control and intrusion detection systems, including pathway installation, structured cabling, terminations, and camera mounting. We do not install or configure control panels, card readers, fire alarm systems, or security software, and do not commission security devices.

Access control cable connects badge readers, electronic strikes, magnetic locks, and request-to-exit sensors to control panels. Cat6 and Cat6A horizontal cabling runs from each entrance to the security closet or main distribution frame. Every home run is labeled to ANSI/TIA-606 standards and terminated to T568A or T568B specifications.

Intrusion detection wiring includes security cable for motion sensors, glass break detectors, perimeter contacts, and end-of-line resistor circuits. Fiber optic backbone cabling connects remote buildings or exterior perimeter systems to the central security network.

Access Control System Components

Badge readers, fob readers, and biometrics authentication points
Electronic strikes, magnetic locks, and door locking hardware
Door position switches and monitoring circuits
Request-to-exit sensors and push-button connections
Controller home runs and power coordination

Intrusion Detection and Surveillance Components

Motion sensors and glass break detectors
Perimeter contacts and window sensors
End-of-line resistor circuits and alarm panel connections
Supervised zone wiring and tamper detection circuits
Video surveillance and security camera cable pathways

Infrastructure and Documentation

Cat6 and Cat6A horizontal access control cable for readers, strikes, sensors, and REX devices
18 AWG to 22 AWG security wire with shield for sensitive circuits
Fiber optic single-mode and multi mode cabling for runs up to 500 ft and beyond
48-port and 24-port patch panels with horizontal and vertical wire managers
Relay rack and wall-mount cabinet terminations in IDF and MDF spaces
Plenum, riser, and PVC cabling selected by pathway and voltage requirements
Labeled home runs with ANSI/TIA-606 compliant identification
Fluke-certified cable testing, as-built documentation, and photo records

Industries We Serve with Intrusion & Access Control

Our access control solutions support diverse commercial environments where effective security infrastructure and minimal disruption matter.

structured cabling solutions for corporate

Corporate Offices and Call Centers

Corporate environments require discreet installations and scalable cabling systems.

Our team can coordinate pre-wire work during off-hours to maintain business operations.

Clean MDF and IDF terminations support IT and security system convergence on a single structured cabling backbone.

structured cabling solutions for healthcare

Healthcare and Educational Institutions

Healthcare facilities may require after-hours installation to protect patient privacy.

Education campuses involve multi-building coordination and summer installation windows.

Fiber optic backbones connect remote buildings while Cat6A horizontal cabling serves individual access points.

Elevator and turnstile access systems require specialized wiring and configuration.

structured cabling solutions for industrial

Manufacturing, Industrial, and Government Facilities

Industrial settings require ladder rack, cable tray, and conduit pathways.

Our technicians install cabling that integrates with existing plant infrastructure while maintaining separation from high-voltage circuits. Perimeter intrusion detection and loading dock access control prevent unauthorized entry.

Government facilities require secure structured cabling and compliant documentation packages.

structured cabling solutions for data centers

Retail and Data Centers

Retail stores require fast buildouts with clean installations to optimize customer experience.

Data centers demand precision and zero tolerance for downtime.

Cloud-based and on-premise controller systems both require organized, tested infrastructure.

Learn How Intrusion & Access Control for Data Centers

How We Coordinate Security Services with Other Trades

Access control system installation requires disciplined coordination to deliver infrastructure that passes inspection and supports commissioning.

Our technicians attend pre-construction meetings to review door schedules, panel locations, and power requirements. We confirm pathway routes, ceiling access, and fire-rated penetrations before rough-in begins. Life-safety integration is coordinated so electronic locks fail-safe and unlock upon fire alarm activation per Authority Having Jurisdiction requirements.

Security integrators receive verified circuits, labeled terminations, and clear as-built drawings at handoff. General contractors benefit from predictable scheduling. Facility directors gain infrastructure that passes inspection without change orders.

Structured Cabling Standards and Testing

With over 75 years of hands-on experience in telecommunications and data center build-outs, our technicians have delivered access control and intrusion wiring for facilities where precision and uptime matter.

Materials and Standards

Division 27 (Structured Cabling) standards and EIA/TIA specifications guide every installation.

We use PANDUIT, LEVITON, COMMSCOPE, BELDEN, HUBBELL, and CPI (Chatsworth) components.

Horizontal cabling is terminated to T568A or T568B per project specifications. All labeling follows ANSI/TIA-606 standards.

Testing

Fluke-certified cable testing verifies performance on every data circuit. Test results are included in final documentation.

Fiber optic installations include fusion splicing, APC and UPC connector options, and fiber panels or LIU enclosures.

Single-mode fiber supports long-distance campus runs. Multi mode fiber connects buildings within 300 meters.

Warranties

We provide a lifetime craftsmanship warranty on our installations.

Manufacturer warranties up to 25 years are available on structured cabling components when cable certification testing and proper installation standards are met.

We specify top-tier brands onlyPANDUITLEVITONCOMMSCOPEBELDENHUBBELLCPI (Chatsworth)

Results and Long-Term Benefits

Professionally installed access control wiring reduces change orders and shortens commissioning timelines. Organized pathways and complete labeling enable security integrators to install devices and commission systems without delays.

Labeled cabling and accessible terminations enable in-house maintenance teams to resolve issues quickly. Future expansions and technology migrations proceed without infrastructure replacement.

ANSI/TIA-606 labeling and as-built documentation provide long-term operational advantages.

Why Specialized Access Control Solutions Matter

General electricians and security integrators often focus on power distribution and device programming. Commercial Cabling Company provides the organized, tested, and documented communications infrastructure installed in accordance with ANSI/TIA standards that both trades rely on for efficient system installation and commissioning.

Disorganized, unlabeled cabling creates unnecessary complexity. Troubleshooting takes longer, service costs increase, and future changes become difficult. Our technicians deliver clean terminations, wire management, and complete labeling maps that facilities teams can reference years after installation.

From single-drop tenant improvements to
500+ drop data center build-outs.

Every project includes professional installation, full testing and certification, and complete documentation. Our experienced technicians deliver cost-effective, future-ready cabling solutions that ensure your network performs reliably for years to come.

Request A Custom Quote

Project Requirements

Accurate quotes require specific project information. Use our project submission form to provide details and accelerate quoting while reducing change orders.

Information to Provide for Your Quote

Floor plans with door locations and numbering
Door hardware schedule showing readers, strikes, maglocks, and sensors
Security panel and controller locations with power source details
IT closet, MDF, and IDF locations with available rack space
Fire alarm vendor contact and relay/IO requirements
Security integrator contact and system specifications
Construction schedule and occupancy constraints

Submit Your Project Details

Credentials and Proof of Quality

Commercial Cabling Company has completed major data center build-outs and complex voice and data infrastructure projects where precision and uptime matter. Our technicians follow BICSI best practices and deliver installations that meet Division 27 (Structured Cabling) and EIA/TIA standards.

Photo documentation is provided on every project. Cable certification testing verifies performance and supports manufacturer warranty activation.

Commercial Cabling Company is a Women-Owned Small Business (WOSB) headquartered in Arizona.

We treat craftsmanship as a measurable standard, not a preference. If a system does not look clean, test correctly, and meet industry standards, it does not leave our hands.

Structured Cabling Services Service Areas Throughout Arizona and Nevada

Commercial Cabling Company is headquartered in Arizona, serving commercial clients throughout Phoenix, Mesa, Scottsdale, Chandler, Tempe, Tucson, Flagstaff, and Las Vegas. After-hours and weekend scheduling accommodates occupied facilities and tenant improvement timelines. Emergency support is available for inspection-readiness or commissioning delays.

We maintain a wide network of trusted technicians throughout the United States for national project coverage.

Hear from Our Satisfied Clients

Frequently Asked Questions About Intrusion and Access Control

What is the difference between access control pre-wiring and providing access control systems?

We install the low-voltage cabling infrastructure that connects access control devices to control panels, but we do not provide the access control systems themselves. Our pre-wiring service delivers organized pathways, labeled terminations, and certified testing that security integrators depend on for device installation and commissioning. This approach ensures reliability through specialized structured cabling expertise while allowing your security team to select the access control technologies that match your business needs.

How do you install pre-wiring for cloud-based and wireless access control systems?

Cloud-based and wireless access control technologies still require structured cabling for power, network connectivity, and controller communications. We install Cat6 and Cat6A horizontal cabling to support Power over Ethernet (PoE) for wireless access points and network-connected controllers. Our design and installation methodology ensures adequate bandwidth and power delivery for advanced access control systems while maintaining flexibility for future technology migrations.

What security needs does access control pre-wiring address for commercial facilities?

Access control pre-wiring supports a range of security applications including entrance authentication for employees and visitors, perimeter intrusion detection, asset protection in specific areas, and video analytics integration. Our technicians install cabling for badge readers, biometrics, electronic locks, motion sensors, and video surveillance pathways. This infrastructure enables your security strategy while providing peace of mind through organized, tested, and documented installations.

Can you optimize existing access control wiring or only install new systems?

We provide both new installations and optimization services for existing access control infrastructure. Our technicians perform on-site assessments to evaluate current cabling, identify deficiencies, and recommend improvements. Services include IDF and MDF clean-ups, re-labeling circuits to ANSI/TIA-606 standards, pathway reorganization, and adding capacity for system expansions. This approach extends the life of existing infrastructure while improving troubleshooting efficiency.

What ongoing support do you provide after access control pre-wiring installation?

We provide as-built documentation, photo records, Fluke-certified test results, and complete labeling maps at project handoff. Our lifetime craftsmanship warranty covers installation workmanship, and manufacturer warranties up to 25 years are available on structured cabling components. While we do not manage your access control systems or provide device-level support, our documentation enables your security team and integrators to troubleshoot efficiently and plan future expansions.

How does pre-wiring support advanced technology like video analytics and automation?

Modern access control systems integrate with video analytics, building automation, and advanced technology platforms that require high-bandwidth, low-latency cabling. We install Cat6A structured cabling and fiber optic backbones that support current devices and future upgrades. Our infrastructure accommodates IP-based cameras with video analytics, automated door controls, elevator access systems, and integration with building management platforms. Proper cable selection and testing ensure systems are designed for long-term performance.

How do you coordinate premise wiring with security integrators and other trades?

Our technicians attend pre-construction meetings to coordinate pathway routes, panel locations, and power requirements with electrical contractors, fire alarm vendors, and security integrators. We confirm that electronic locks fail-safe per life-safety requirements and document relay wiring between systems. Security integrators receive verified circuits, labeled terminations, and clear as-built drawings at handoff. This disciplined coordination ensures infrastructure passes inspection and supports commissioning without delays.

Get Started with Professional Access Control Installation

Ready to Build a Network Infrastructure That Lasts?

Call (480) 252-1311 to discuss your access control wiring requirements. Our team provides same-day or next-day quotes for projects throughout Arizona and Nevada. Site walks are available to assess existing conditions, review door schedules, and confirm pathway requirements.

Request A Quote